BetaGauge330 Pressure Calibrator

General Features
Integrated internal electrically operated pneumatic pump: generates pressure to 300 PSI and vacuum to -12 PSI (-0.8 to 20 Bar, -80 to 2000 kPa)
Accuracy of 0.035% FS
Small rugged compact design operates on eight (8) standard Alkaline AA batteries
Only 8” high x 4” wide x 2-3/8” deep (20 cm x 10 cm x 6 cm)
Lightweight at just 2.5 pounds (1.2 kg)
External pressure module interface supports all BetaPort-P pressure modules (requires optional BPPA-100 module adapter)
Pt100 RTD input for temperature measurement, accurate to 0.2°F (0.1°C) (measurement only)
24 V loop power to power device under test
Store and recall 5 user defined setups
Clearbrite LCD with backlight can be configured to display up to 3 variables displayed simultaneously (user controlled)
Ideal for gas custody transfer flow meter applications
Pressure displayed in the user’s choice of 15 engineering units
Switch test is automatic using internal sensor or external pressure module
IP51 Rated
Percent error function
Fingertip Pressure Calibration with Integral Electric Pressure Pump
The BetaGauge330 is a revolution in pressure calibration technology for the process industries. With the 330, technicians have a small, lightweight calibrator that generates from high vacuum to 300 PSI using a high performance integral electric pump.
Gone is the drudgery of manual pumping or using large, heavy and unwieldy boxes with limited portability and poor battery life.
The BetaGauge330 has a form factor only slightly larger than Martel’s popular BetaGauge 321 and weighs in at a mere 2.5 pounds. The housing is contoured to easily fit a technician’s hand with good balance top to bottom.
 Performance doesn’t stop with the pump. The BetaGauge330 provides ±0.035% of full scale accuracy on its internal, isolated pressure sensor. Temperature compensation on its internal sensor ensures accuracy in field applications. An external pressure module connection supports all 29 ranges of BetaPort-P pressure modules for even greater measurement capability.
BETA
 A Pt100 RTD input is provided for temperature measurements accurate to ±0.1 °C (0.2 °F). In addition, the BetaGauge 330 measures and simulates 4-20 mA loop current signals. It can measure up to 30 VDC. An internal 24 VDC Instrument Power Supply supplies power to a transmitter under test.
 Like its calibrator siblings, the BetaGauge330 displays up to 3 calibration values at one time from the choice of internal pressure sensor, external pressure sensor, temperature from the optional RTD probe or electrical (mA or VDC). The display is a large back lit graphics style LCD that’s easy to read in any lighting condition.
 The new BetaGauge330 Pressure Calibrator provides a number of convenience features. Switch test can be performed on internal or external pressure input. Percent (%) Error and damping functions are provided. Up to five frequently used setups can be stored and retrieved with one button recall.
 
The compact, rugged design operates on eight (8) standard AA Alkaline batteries. Due to the power saving designs incorporated in the BetaGauge330, it can perform approximately 300 calibration cycles to 150 PSI on one set of batteries or 100 cycles to 300 PSI.
 The 330 comes in 5 ranges of 30 PSI, 150 PSI and 300 PSI gauge and 30 PSI and 150 PSI absolute.
 Like all Martel calibrators, the BetaGauge330 comes from the factory ready to go to work with batteries installed, NIST traceable calibration certificate, test leads, connection hose, fittings, deluxe carrying case and user manual.
 
LDT-500 Martel/BETA Pneumatic Dirt/Moisture Trap
The LDT-500 is a Dirt/Moisture Trap that is used in pneumatic applications to protect valuable assets such as sensors, pumps, or calibrators from damage. It features a 1/8″ MNPT Outlet connection with o-ring seal and a Universal (1/8″ NPT Female or 1/8″ BSP Female Thread). The trap is designed to be used in a vertical position and can handle up to 500 PSIG/35 Bar. The latest version features a vent valve and hose, so the end user does not have to remove the trap if there is moisture built up in the clear acrylic chamber.
Cleaning/Assembly is handled by simply unscrewing the top section of the chamber and removing the two o-rings.
Media Compatibility: Electroless Nickel over Brass, Acrylic, Cast Urethane and Nitrile (Buna-N) O-Ring seals.
Size: 2.5” x 1” (L x W) – Weight: 5 ounces
Connections: 1/8” MNPT x (1/8” FNPT or 1/8” FBSP)
Click BETA贝塔 to go to the Chinese Website.
关于银飞
企业概况
企业荣誉
企业学问
企业环境
员工风采
维修售后
产品中心
温度校验仪
测试仪器
数字压力表
澳们威尼斯吴乐城
功率分析仪器
工业内窥镜
澳们威尼斯吴乐城
压力校验仪
资讯资讯
企业资讯
行业资讯
展会资讯
行业解决方案

专业选型请咨询大家工作人员

全国统一服务热线

0755-83959699
0755-83983899
0755-23964199
0755-23964599

(国内任一地区手机、座机均可拨打)

  • 公众号

  • 微博

  • 电子邮件

版权所有:澳们威尼斯吴乐城 粤ICP备15021421号-3

澳们威尼斯吴乐城供应商哪家好,澳们威尼斯吴乐城品牌推荐,澳们威尼斯吴乐城先容说明,Fluke功率分析仪器价格,数字压力表多少钱

收缩

银飞电子在线客服

  • 销售一部 点击这里给我发消息
  • 销售二部 点击这里给我发消息
  • 销售三部 点击这里给我发消息
  • 0755-83959699
  • 0755-83983899
  • 在线留言
XML 地图 | Sitemap 地图